WIP: Wizard Face Walking Stick in birch

As woodspirits go, mine are carved a little deeper with an emphasis on long mustaches and beards. I see these guys as more wizards than spirits. This lighter colored one is birch, a wood I've found quite easy to carve.










I'll give it stain of some sort, though I do like how it looks right now. Maybe just a clear finish then? Either way I'll also cap the tip with either a flat or pointed metal piece. This one might have room for a lanyard too. I love the way the stick curves from the back of the head up to the top. It seems to provide a natural handrest.

The tiny little birch kuksa

I'm having a blast carving this birch wood! This micro kuksa might end up a necklace pendant or maybe some sort of decorative ornament. It's smaller than a teaspoon, and the long handle lends itself to some sort of necklace attachment. It was whittled from birch and soaked in linseed oil. Displayed next to some untreated birch, you can really see the difference the oil makes.

One for The Sharpened Axe

Attention: Mike Oscar Hotel @TheSharpenedAxe: I found a large antiques mall today. One section was devoted entirely to old hand tools. It was terrific! I picked up my first hand auger, but I'm sure I'll return to buy an axe, a plane, a saw, an adze, maybe a drawknife or two...

Anyway, here are some (cellphone) pics of axes. First the Plumb axe "Autograf" model.







Next is a Tommy claw axe, the one with the claw.



And finally an odd one, listed as a "bearded bench axe." It has a chisel grind and shows a ton of wear. I would love to know more about it and it's intended use. It was buried in a pile of large broadaxes with their beautifully bent handles (see the first pic at the top of this post.)






For those who don't know, The Sharpened Axe is one of my favorite blogs. Topics include but are not limited to axemanship,axe restoration, and general handy/outdoorsy topics. Give it a read!

Keeping the crooked knife sharp

The crooked blade is extremely helpful when carving concave shapes such as those needed for bowls and spoons. Unfortunately, this helpful shape can be tough to sharpen on traditional sharpening stones. The best solution is to make the sharpening gear fit the blade shape. Here's what I use, and how to make your own.

First, gather the items seen in this first photo. You'll need:
-scrap of leather
-polishing compund (I'm going with Flexcut Gold, but jewler's rouge or the like will work too)
-sandpaper of varying grits (here I'm using 220 and 600 wet/dry)
-three straight sticks about the size and shape of the inside curve of the knife blade
-stapler with staples



Cut the leather to wrap once around a stick, fuzzy suede side out, then staple it in place. I used a basic office stapler, but I suppose a staplegun would be even better. Apply some of the polishing compund to the leather. Do the same with the sandpaper on the other two sticks, only without any polishing compound. You now have two sharpening sticks and a strop for your crooked knife!



When using the sharpening sticks and strop, wipe them down the blade from spine to edge. Only go in this direction. Start with the coarsest stick first, then the next finest, and finally polish with the strop.



When you're done, the edge should be nicely polished and sharp enough to remove arm hairs. Careful now!

Birch spoons and letter openers

My friend Phil visited me recently, with a gift from my mom and dad: a pile of birch wood! My parent's front yard birch tree was starting to threaten the power lines, so dad did some pruning. I'm happy to report that everything I've read about this legendary wood is true.




I've managed to carve some spoons, a spatula, and even a few letter openers. The grain is straight to slightly curved, with a few small knots. Those knots and flaws I've found have been easy to work with.

These still need some drying, sanding, and staining.I'll use salad bowl finish or maybe butcher block oil. I plan to use the spatula and one of the spoons when camping with my dutch oven!

The Cracked Spoon

Wood never quits. It can be a stubborn material to work with, and despite our efforts to steam, carve, chop, and saw it into shape, wood has a plan all it's own. Halfway through carving this spoon I knew it was going to split right at the bowl. I decided to continue anyway, figuring it would be a learning experience. The crack is hardly noticeable. Besides, there's beauty in the broken, right? Wabi sabi I think it's called? Sure.

A Brand New Horse

I carved this horse for my friend's niece, Audrey. While similar to previous efforts, this horse has a slightly curved face and a flatter tail than others I've made. The wood is basswood finished with salad bowl finish and acrylic paint. The monogram is applied with a woodburner. The dark spot on the horse's left flank is a naturally occurring flaw in the wood.