Old time whittler's tricks: Linked Hearts

Two hearts, carved from a single piece of tupelo wood. I like tupleo. It's easy to carve, but a bit tougher than basswood. I stained it two different colors to further the illusion of two seperate objects "magically" intertwined.

I made these thick enough to withstand causal handling, and chose tupelo for it's durability. People will want to pick this up, and I will want it to stay in one piece!

How to: Whittle some Spike Trolls

Spike Trolls (a rough translation of spiketrollet, aka "carved trolls"), are a quick and easy project for whittlers of any experience level. You get to try a variety of grips, practice your cuts, and make something cute out of material you can find anywhere. Here's how I do it, step-by-step: 1. Start with a stick of green wood, as big around as your thumb. The base end should be cut flat enough to support the spike troll on an even surface.

2. Define the "hat" area by shaving up from the hatband to the top of the stick.

3. Shape the "hat" into a general cone shape, allowing for curves if you'd like.

4. Make a stop cut for the top of the "face." Shave bark towards this line to define the forehead area.

5. Complete the face area by carving a shallow notch up to the forehead stop cut.

6. Shape the "hat"as desired. I like to carve smooth notches representing folds in the hat.

7. Draw the face with a Sharpie.

8. Color the hat if desired. I use acrylic paints.

9. The final step, of course, is to make your new spike troll a buddy!

Old time Whittler's tricks: cube in cage, with a wooden chain

Whittlin' really comes down to patience, experience, and skill, in that order. More than just about anything else, moving parts take special attention. It takes lots of tiny cuts in order to carefully remove certain areas, while preserving the parts you'd like to keep.

Whittling free-moving parts is very satisfying when it goes well, and a little heartbreaking when it does not. Break a link in your chain, and you might just discover a few brand-new curse words.

A Mahogany display for some Hand-Carved Mustaches

This mahogany block really took to boiled linseed oil. I love the way the oil darkens the wood, while giving it depth and sheen. To display both rows of mustaches I drilled the front row deeper than the back. This lets the back row sit up a little higher.

I carved a large handlebar mustache in low relief, then painted it black for contrast with the mahogany. I also added a circle of blackboard paint with a light blue border, on which I can chalk the price. The words "Hand-Carved" are applied to one side with a woodburner.

Carved Mustaches on Sticks!

How many varieties of lip whiskers is it possible to carve? I think I just might find out. These 'staches are whittled from basswood, soaked in linseed oil, attached to sticks, and given a final coat of shellac. They're fun, they're dashing, they're mustaches-on-sticks!

Whittling wizard candlesticks from old textile spools

These old textile spools are great for carving. They have some real character, and the beehive shape at one end makes for a great standing base. I carved these as pair, with one wizard's beard arranged normally, and his buddy's beard and mustache are twisted around the spool, like it's blowing in the wind. After carving and sanding, I gave the candlesticks three coats of linseed oil, some acrylic paint for the eyes and eyebrows, and some clear shellac. I like how they look, especially with the brass rings on top.

The flowing mane of a carved toy horse

I've been working on carving more detailed hair recently, and while it's time consuming, I really like the added texture it can bring to a toy. On these toy horses, it makes them look more lively and just plain pretty.